Star Micronics NP-226 Product Specifications page 43

44) Partition drive select :<< GS % n >>
Code
Description
* "n" indicates the following:
n(HEX)
01
02
03
* Default value is selected by the DIP switch.
* If assigned beyond the specified area, the data is neglected and the select will not
change.
* Automatic partition is as follows:
NP-226
NP-326
45) Print density set
Code
Description
* "n" ranges from [41] h (65%) to [87] h (135%). However, set it for actual use in the
range [41] h (65%) ≤ n ≤ [82] h (130%).
* At the initial status, 100% or 125% can be selected by the DIP switch, S2-8.
* This command has priority over the setting by DIP switch.
46) Japanese Kanji overall print mode setting: << FS ! n >>
Code
Description
"n" has following meanings
Bit
0
1
2
3
4
5
6
7
* If double height and double width are set at the same time quadruple character will be formed.
* All of the printed characters will be underlined except for the 90° rotated characters and spaces
created by horizontal tab.
* Underline width is determined by the value set in [Underline set/reset] section.
The default value is "1".
* Different sizes of character mixed such as double width and normal size can be printed.
* The default value of "n" is [00] h.
D-F0390 NP-326 Product specifications Ver.0.02
: [1D] h + [25] h + n
: Selects partition drive.
Divide
1 fixed partition
2 fixed partitions
automatic partition
1 partition
Less than 248 dots
Less than 352 dots
:<< GS ~ n >>
: [1D] h + [7E] h + n
: Sets print density in the range between 65% ~ 135% of the standard value,
S2-8 Off.
: [1C] h + [21] h + n
: Set Japanese Kanji overall print mode
Function
Undefined
Undefined
Double width
Double height
Undefined
Undefined
Undefined
Underline
* [01≤n≤03] h
2 partitions
More than 249 dots
More than 353 dots
* [41≤n≤87] h
* [00≤n≤FF] h
Values
0
-
-
Reset
Reset
-
-
-
Reset
39
1
-
-
Set
Set
-
-
-
Set