Table of Contents
Advertisement
39) QR code print
ESC + "q" + S + E + M + DATA [+ "," + M + DATA +......] + NUL
CODE
About parameter
1.
2. E: Correction level
3. M: Input data mode
* If multiple modes should be input, each mode data (M + data) needs to be separated by
" , ".
* If you want to input " , " and NULL in the data of 8 bit byte mode, input " ! " [21] h+"," and
" ! " [21] h + NULL.
* " ! " itself is input as " ! " + " ! "
* Kanji data should be input by Shift JIS code.
Restrictions
Available QR codes are from version 1 to version 14 of model 1 symbols.
If input data exceeds the area to be printed, QR code is not printed.
D-F0390 NP-326 Product specifications Ver.0.02
:<< ESC q S E M >>
: [1B] h + [71] h + S + E + M + DATA [+ [2C] h + M + DATA +....] + [00] h
S: module size
* Assign 1 module size of QR code by printer's dot numbers.
* There are 5 sizes which can be assigned, 1, 2, 3, 4, 8 dots
* If invalid size is assigned, the printer assigns it as 4 dots
* Selects error correction level to be used for restoring QR symbol.
* Following values can be assigned.
* If invalid value is assigned, the printer determines it to be L.
E
Correction level
0
L
1
M
2
Q
3
M
* Assign input data mode
* Following modes can be assigned
* If invalid mode is assigned, data is ignored until valid
Mode is assigned.
M
Input data mode
"N"
Numeric mode
"A"
Alpha numeric mode
"B"
8 bit byte mode
"K"
Kanji mode
Restore. capability
7%
15%
25%
30%
36
Advertisement
Table of Contents
