Star Micronics NP-226 Product Specifications page 36

Super high speed kiosk printer
Table of Contents

Advertisement

26) Absolute position set
Code
Print start position is assigned by dots in 1/203rd of inch from the beginning of line.
* Divide the value of dot by 256, place quotient to n2, and remainder to n1.
* The print start position is n1 + n2 x 256 from top of the line.
* Setting which exceeds end of line is ignored.
* If the command is received in the middle of line, the current position is also valid.
27) Relative position set
Code
Print start position is assigned by dots from current position in unit of 1/203rd of inch.
* Right direction is treated as plus and left as minus.
* For assigning N dots in minus direction (left), it will be: N dots = 65536 - N
* Divide dots by 256, quotient is n2 and remainder is n1.
* Assigning beyond the end of a line is neglected
28) Barcode print
Code
Description : Selects barcode symbology and prints barcode.
* The next print start position is on the line head
* Select following barcode symbology with "n" value.
* Dn indicates the character code to be printed.
n (Hex)
00
01
02
03
04
05
06
07
* When there is data in the buffer this command is neglected.
* If character code Dn is not a printable character, following data after Dn will be treated
as normal data.
* If the print character numbers are fixed in the barcode symbology the input character
numbers should match to the print character numbers.
* If horizontal data exceed one line, the exceeded data cannot be printed.
29) Barcode width size select
Code
Description : Selects width of barcode
* Default value of "n" is [03]h.
30) Barcode height select
Code
Description : Selects barcode height
* "n" shows the vertical dot number
* Default value of "n" is 162([A2] h).
D-F0390 NP-326 Product specifications Ver.0.02
:<< ESC $ n1 n2>>
: [1B] h + [24] h +n1 +n2
:<< ESC \ n1 n2>>
: [1B] h + [5C] h + n1 +n2
:<< GS k n Dn NUL >>
: [1D] h + [6B] h + n + Dn + [00] h
Barcode symbology
UPC-A
UPC-E
EAN-13 (JAN-13)
EAN-8 (JAN-8)
CODE 39
ITF
CODABAR
CODE128
:<< GS w n >>
: [1D] h + [77] h + n
:<< GS h n >>
: [1D] h + [68] h + n
* [00≤n1≤FF] h
* [00≤n2≤03] h
* [00≤n1≤FF] h
* [00≤n2≤FF] h
* [00≤n≤07] h
* [02≤n≤04] h
* [01≤n≤FF] h
32

Advertisement

Table of Contents
loading

This manual is also suitable for:

Np-326

Table of Contents