Star Micronics NP-226 Product Specifications page 34

20) Panel switch enable/disable:<< ESC c 5 n >>
Code
Changes the FEED switch valid or invalid.
* "n" is only valid for LSB(b0)
* "n" bit has a following meanings
b0
0
1
* Default value of "n" is [00]h.
21) Print and "n" line feed:<< ESC d n >>
Code
Prints the data in the print buffer and feeds paper by "n" lines.
* Beginning of a line is a print start position.
* If there is print data remained, line feed is activated for the same height of character.
22) Character code table select:<< ESC t n >>
Code
Selects either Japan code table or non-Japan code table.
Explanation : "n" value has following meaning.
n(Hex)
00
01
02
03
04
05
06
* The default value of "n" is [01]h.
D-F0390 NP-326 Product specifications Ver.0.02
: [1B] h + [63] h + [35] h + n
Description
enable FEED switch
disable FEED switch
: [1B] h + [64] h + n
: [1B] h + [74] h + n
character code table
Non-Japan character code table
Japan character code table
Code Page 858
Code Page 1250
Code Page 1251
Code Page 1252
Code Page 1254
* [00≤n≤FF] h
* [00≤n≤FF] h
* [00≤n≤06]h
30