Star Micronics NP-226 Product Specifications page 30

10) Bit image mode set: << ESC * m n1 n2 Dn >>
Code: [1B] h + [2A] h + m + n1 + n2 + Dn
Data is printed in bit image by following the bit image mode specified by "m".
* Print total dots divided by 256, quotient is n2 and remainder is n1.
* Total dots in bit image mode are n1 + (256 x n2).
* If the bit image input data exceeds specified position, the exceeded data will be disregarded.
* Bit image data (Dn) interprets bit 1 as print and bit 0 as not print.
* Bit image mode is indicated below.
m (hex) Bit image mode
00
01
20
21,23
D-F0390 NP-326 Product specifications Ver.0.02
Vertical direction
Dot
quantity
8 dots
single density
8 dots
double density
24 dots
24
single density
24 dots
24
double density
* [m = indicated below] h
* [00≤n1≤FF] h
* [00≤n2≤02] h
Dot Dot
density density
8 67DPI 101DPI
8 67DPI 203DPI
203DPI 101DPI
203DPI 203DPI
26
Horizontal direction
Maximum dot number
NP-226 NP-326
216 288
432 576
216 288
432 576