Star Micronics NP-226 Product Specifications page 20

7. Character table select
S2-2
S2-3
Japanese JIS C 6226 : Full size
Katakana character set + Extended Graphics character set + Code page 858 + International
character : Half size
Korean KSX 1001:1992 : Full size
Katakana character set + Extended Graphic character set + Code page 858 : Half size
Chinese GB18030-2000 : Half / Full size
Greek Code page 1253 : Full size (1 byte code)
Please refer to the select character code table for other language.
4.1.3 Self diagnostic print
1) By performing self-diagnostic print following items are checked.
a) Proper function of control circuitry
b) Proper function of printer mechanism
c) Print quality
d) Control F/W version
e) DIP switch setting status
f) Correct function of paper out sensor
g) Head wide (automatically detected)
2) Start and end of self diagnostic print
Set the power on while pressing the FEED switch and release the FEED switch after the printer
mechanism activates to start self-printing.
The self diagnostic print automatically ends when a preset number of characters are finished
printing. While printing, the printer is in Off-line mode.
4.1.4 No paper sensor
No paper sensor is mounted on the paper path in the printer mechanism.
It detects no paper status of the roll paper. When detecting no paper status, the printer sends
PE signal to the host and stop printing. Pay special attention to the end of roll paper. The end
should not be glued to the core of the roll. If no paper status is detected, replace the roll paper.
D-F0390 NP-326 Product specifications Ver.0.02
Japanese Korean
OFF
OFF
Chinese
OFF
ON
16
Greek
ON
OFF
ON
ON