Table of Contents
Advertisement
4.3 Buffer full print
If there remains data in the buffer after one line of data is received, printer automatically prints
preceding data. The volume of buffer full data varies depending on ANK, Kanji or bit images.
4.4 Partition drive
The fixed partition drive (No partition or 2 partitions) or automatic partition drive can be selected
by the memory switch and or the command. It should be selected according to the power supply
capacity and print duty.
1) Partition drive select
MS1-3 Partition drive select
※2 partition or automatic partition can be selected by the memory switch by default. No
partition can be selected only by command.
※2 partitions select may decrease print speed.
2) Automatic partition drive
Select automatically 1 partition or 2 partitions by total dots / line.
NP-266S
NP-366S
※ Automatic partition drive will change the print speed according to print ratio. Print noise
may occur.
※ The default status is set as selected. Partition setting can be selected by DIP switch or
command. Refer to the command description for the details.
※Automatic partition select may decrease print quality.
4.5 Select Full size and half size character
Character
Japanese
Command[FS &],[FS .] or Switching Shift JIS code
Korean
Command[FS &]、[FS .]
Please refer to the followings
st
1
byte
Chinese
nd
2
byte
rd
3
byte
th
4
byte
Greek
No switch (Only Full size)
Polish
No switch (Only half size)
Russian
No switch (Only half size)
Scandinavian No switch (Only half size)
Turkish
No switch (Only half size)
D-F0399 NP-266S/366S Specifications Ver.0.01 Provisional
Function
No partition
Less than 248 dots
Less than 352 dots
1 byte code (Half size)
00 h ～ 80 h
ON
OFF
2 partitions
Automatic
2 partitions
Higher than 249 dots
Higher than 353 dots
How to select
2 byte code (Full size)
81 h ～ FE h
40 h ～ 7E h
80 h ～ FE h
16
4 byte code (Full size)
81 h ～ FE h
30 h ～ 39 h
81 h ～ FE h
30 h ～ 39 h
Advertisement
Table of Contents
