Partition Drive - Star Micronics NP-345 Product Specifications

4.4 Partition drive

The fixed drive (1 or 2 partition drives) or "automatic partition drive" can be selected by the

DIP switch and commands. It should be selected according to the power supply and print

duty.

1) Fixed partition

S-5

Fixed partition select

2 fixed partition select may decrease print speed.

2 fixed partition select may decrease print quality.

2) Automatic partition drive

Switch between 1 partition and 2 partitions according to the total dots/line printed.

NP-345

Less than 287 dots

Automatic partition drive select will automatically change the print speed

according to print ratio. Print noise may appear.

The default value selected by commands will be the fixed partition selected by

The DIP switch. Refer to the section 5.3.

Automatic partition select may decrease print quality.

Function

2 partitions

1 partition

Higher than 288 dots

OFF

1 partition

2 partitions

Table of Contents