Front Panel - D-Link DVG-5112S User Manual

DVG-5112S User's Manual

Front Panel

Note: When starting up DVG-5112S, the Alarm and VoIP will light up. After about 40 seconds, the VoIP
indicator will blink in green. If the Alarm indicator continues to blink, it means DVG-5112S is
currently communicating with ISP and has yet to obtain an IP address or fail to register to Voice
Service Provider.
Left Side
RST: Use to Restore to factory default: (IP address, Administrator's Name and Password)
(1) Disconnect the power plug.
(2) Press and hold the reset button for 6 seconds.
(3) Reconnect the power plug while pressing down on the reset button.
(4) Release the reset button after 6 seconds. Factory settings will be restored.
D-Link Systems, Inc.
Power/Alarm Indicator: Green light indicates a normal power supply. Red
light indicates when performing a self-test/booting up or the DVG-5112S's
abnormal operation.
VoIP Indicator: Blinking green light indicates normal operation. It will light
on green when DVG-5112S is registered with the service provider.
Phone1/Line, Phone2 Indicator: Phone LED should be in orange while
Phone in use.
7