Calling Features - Advanced Setting - D-Link DVG-5112S User Manual

DVG-5112S User's Manual

Calling Features - Advanced Setting

DVG-5112S provides advanced settings: Call Pickup and Automatic Redial.
Note: Automatic Redial is only used for the latest call (NO two calls reserved for Automatic Redial). The
duration of Automatic Redial is set to 10 minutes. If the callee is still not available after 10 minutes,
DVG-5112S will not dial again.
Function Code
*40#
*41#
*42#
*43#
*44#
*45#
D-Link Systems, Inc.
Description
Call Pickup: The user can use the function of call pickup to
answering others calls. When one of FXS is ringing and there is no
one to answer the call. The user can use another FXS port to pick
up the ringing call with this function code.
For Example: If Alice calls Bob (9901701) who does not answer.
Carol can pick up the call by dialing *40 9901701#.
Automatic Redial: The remote party is initially busy when you call.
Hang up the phone and then pick up to dial *41# and then hang up.
You are hearing a ring tone when the remote party is available. You
are alerted and then pick up the phone to wait for the remote party
answering.
It is to cancel the latest automatic redial function.
It is to query how long shall DVG-5112S wait to redial (ms).
It is to adjust the duration of waiting for automatic redial.
Method: Dial *44 + Expiry Time#
It is to query the duration of waiting for automatic redial (ms).
27