D-Link DVG-G5402SP User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Gateway
  5. VoIP Wireless Router DVG-G5402SP
  6. User manual
D-Link DVG-G5402SP User Manual

D-Link DVG-G5402SP User Manual

Wireless voip gateway
Hide thumbs Also See for DVG-G5402SP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
DVG-G5402SP
Wireless VoIP Gateway
User's Manual
Version 1.0
(31 May 2007)

Advertisement

Table of Contents
loading

Related Manuals for D-Link DVG-G5402SP

Summary of Contents for D-Link DVG-G5402SP

  • Page 1 DVG-G5402SP Wireless VoIP Gateway User’s Manual Version 1.0 (31 May 2007)
  • Page 2 Reproduction in any manner whatsoever without the written permission of D-Link Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-Link logo are trademarks of D-Link Corporation/D-Link Systems Inc.; Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

  • Page 3: Table Of Contents

    Contents 1. Introduction ............................. 4 1-1 Product Overview ..........................4 1-2 Hardware Description ........................5 2. Gateway Configuration – Use Web Browser ..................7 2-1 SETUP............................. 8 2-1-1 WAN Settings ........................8 2-1-2 LAN Settings ........................11 2-1-3 Wireless Settings ........................ 13 2-1-4 VoIP Settings (SIP Basically setting)...................

  • Page 4: Introduction

    1. Introduction 1-1 Product Overview The DVG-G5402SP Wireless VoIP Gateway is designed to carry both voice and facsimile over the IP network and wirelessly share Internet access. It uses the industry standard SIP call control protocol so as to be compatible with free registration services or VoIP service providers’...

  • Page 5: Hardware Description

    WAN: When a connection is established the 10 or 100 LED will light up solid. The LED will blink to indicate WLAN: A steady light indicates a wireless connection. A blinking light indicates that the DVG-G5402SP is receiving/transmitting from/to the wireless network.
  • Page 6 DVG-G5402SP User’s Manual Telephone Interface Description Rear Panel Line: Connect to your original telephone line on the wall jack with RJ-11 cable. Phone Port (1-2): Connect to your phones using standard phone cabling (RJ-11). LAN: Connect to your Ethernet enabled computers using Ethernet cabling.

  • Page 7: Gateway Configuration - Use Web Browser

    Password are blank (i.e., no login ID, no password).) The gateway does not allow multiple people to configure the gateway simultaneously. Please remember to logout or restart the system if you are not using the web configuration function. D-Link Systems, Inc.

  • Page 8: Setup

    DVG-G5402SP User’s Manual SETUP 2-1 SETUP 2-1-1 WAN Settings WAN (Wide Area Network) Settings are settings that are used to connect to your ISP (Internet Service Provider). The WAN settings are provided to you by your ISP and often times referred to as "public settings".
  • Page 9 DVG-G5402SP User’s Manual SETUP SETUP → WAN SETTINGS DHCP: Select this option if your ISP (Internet Service Provider) provides you an IP address automatically. Cable modem providers typically use dynamic assignment of IP Address. The Host Name field is optional but may be required by some Internet Service Providers.
  • Page 10 DVG-G5402SP User’s Manual SETUP Domain Name Server Assignment: Select Auto or Manual to get the IP address of Domain Name Server assigned by ISP or manually. Domain Name Server IP: Enter the primary and secondary IP address of Domain Name Server if Domain Name Server Assignment is Manual.

  • Page 11: Lan Settings

    DVG-G5402SP User’s Manual SETUP Factory Default MAC Address: The original MAC address of the gateway. Your MAC Address: It is left blank as you log-in via the WAN port. Current MAC Address: It shows the current MAC Address if you ever used the difference MAC address from Factory Default MAC Address.
  • Page 12 DVG-G5402SP User’s Manual SETUP IP Pool Starting Address: Enter the starting IP address for the DHCP server's IP assignment. IP Pool Ending Address: Enter the ending IP address for the DHCP server's IP assignment. IP Pool Uses Other Default Gw: Check the box to assign different default gateway for DHCP clients.

  • Page 13: Wireless Settings

    DVG-G5402SP User’s Manual SETUP 2-1-3 Wireless Settings This section instructs you how to setup your wireless network on the Gateway device. Setup Hint: Every device in the same wireless network must use the same SSID. To avoid wireless network overlap, a specific and different channel is needed.
  • Page 14 DVG-G5402SP User’s Manual SETUP 2-1-3-2 Advanced This section introduces advanced configuration for the wireless access point. If you are not familiar with the following functions, keep the default parameters. In some cases, incorrect settings may reduce wireless performance. Wireless Settings → Advanced Authentication Type: Select the type of authentication.
  • Page 15 DVG-G5402SP User’s Manual SETUP Data Rate: IEEE802.11b supports Auto, 1, 2, 5.5, 11 Mbps signaling rate. EEE802.11g supports Auto, 6, 9, 12, 18, 24, 36, 48, 54 Mbps signaling rate. The data rate will change automatically to get better throughput depending on range and environment of the wireless network.
  • Page 16 DVG-G5402SP User’s Manual SETUP Wireless Settings → Security Settings (WEP) Key Length: Select 64-bit or 128-bit data encryption. Default Tx Key: You can select one of the keys as active key at a time. WEP Key Format: Select the preferred WEP Key Format according to which WEP encryption you choose.
  • Page 17 DVG-G5402SP User’s Manual SETUP Wireless Settings → Security Settings (WEP) Use 802.1x Authentication: Enable or disable using 802.1x Authentication. Authentication RADIUS Server: Port - Enter the port number of the authentication RADIUS server. Keep the default value: 1812 unless the server required change to another number.
  • Page 18 DVG-G5402SP User’s Manual SETUP Wireless Settings → Security Settings (WPA) Select the type of WPA (WPA, WPA2, WPA2 Mixed), choose the proper security mode according to your wireless network. WPA Cipher Suite: WPA Cipher Suite is used for the configuration of WPA or WPA2 Mixed.
  • Page 19 DVG-G5402SP User’s Manual SETUP Wireless Settings → Security Settings (WPA-PSK) Select the type of WPA-PSK (WPA-PSK, WPA2-PSK, WPA2 Mixed-PSK), choose the proper security mode according to your wireless network. WPA Cipher Suite: WPA Cipher Suite is used for the configuration of WPA or WPA2 Mixed.
  • Page 20 DVG-G5402SP User’s Manual SETUP 2-1-3-4 Access Control The Access Control setting provides a service that you can control different access rights for different wireless clients connected to your Gateway. The local and remote stations are limited to access Internet through your Access Points using MAC address of wireless client. Choose the appropriate Access Control Services from Wireless Access Control Mode option.

  • Page 21: Voip Settings (Sip Basically Setting)

    DVG-G5402SP User’s Manual SETUP 2-1-4 VoIP Settings (SIP Basically setting) As there are various VoIP Service Providers, the gateway has been designed to be compatible with them according to RFC standards. If any registration problem occurs, please consult your VoIP Service Provider.
  • Page 22 DVG-G5402SP User’s Manual SETUP SETUP → VOIP SETTINGS Use DNS SRV: Check the box to use DNS SRV to connect to the SIP proxy server. Domain Name Server (DNS) SRV helps clients connecting to the SIP proxy server with a specific domain and get back the IP address of any available server.
  • Page 23 DVG-G5402SP User’s Manual SETUP TTL (Registration interval) [10-7200 s]: Enter the desired time interval at which the gateway will report to your SIP proxy server. SIP Domain: Enter the SIP domain provided by your VoIP Service Provider. (Note that some SIP proxy servers might not require this.) If you enable “Uses Domain to Register”, the gateway will register to the SIP...
  • Page 24 DVG-G5402SP User’s Manual SETUP SETUP → VOIP SETTINGS International Call Prefix Digit: Enter the International call prefix. Country Code: Select the desired country code from the drop-down menu or enter the country code if Other is selected. Long Distance Call Prefix Digit: Enter the long-distance prefix digit for making a long-distance call.

  • Page 25: Time And Date (Ntp)

    DVG-G5402SP User’s Manual SETUP 2-1-5 Time and Date (NTP) SETUP → TIME AND DATE Gateway Time: It shows the current time of the gateway. Time Zone: Select your time zone from the drop-down menu. Time Server #1~#3: Enter the domain name or IP address of a NTP server. The gateway should sync up during start up.

  • Page 26: Advanced

    DVG-G5402SP User’s Manual ADVANCED 2-2 ADVANCED ADVANCED → DDNS Register to DDNS: Check the box to enable DDNS function. It is only necessary when the gateway is set up behind an Internet sharing device that uses a dynamic IP address and does not support DDNS.
  • Page 27 DVG-G5402SP User’s Manual ADVANCED Server address: Enter the IP address or URL (Uniform Resource Locator) of the DDNS Server. Hostname: Enter the URL of the system (or NAT) – applied from domain name registration providers (e.g. www.dyndns.org). Login ID and Password: Enter the Login ID and password used to log-in to the DDNS server.
  • Page 28 DVG-G5402SP User’s Manual ADVANCED Behind NAT: Check the box if the gateway is set up behind a NAT device. Custom: Only for DynDNS. Check the box if you have a custom hostname in DynDNS. Note: If the gateway is set up under NAT, then enter the hostname in the NAT IP/Domain that is the same as the Hostname of the DDNS.

  • Page 29: Firewall Settings

    DVG-G5402SP User’s Manual ADVANCED 2-2-1 Firewall Settings 2-2-1-1 DMZ DMZ (Demilitarized Zone) allows the server on the LAN site to be directly exposed to the Internet for accessing data and to forward all incoming ports to the DMZ Host. Adding a client to the DMZ may expose that computer to a variety of security risks;...
  • Page 30 DVG-G5402SP User’s Manual ADVANCED 2-2-1-2 DoS Prevention Settings ADVANCED → Firewall Settings → DOS PREVENTION SETTINGS Enable DoS Prevention: Check the box to prevent DoS attacks from WAN or LAN. There are various types of DoS attacking. Leave settings in this field to the default if you are not familiar with it.
  • Page 31 DVG-G5402SP User’s Manual ADVANCED 2-2-1-3 IP Filtering Use IP Filters to deny particular LAN IP addresses from accessing the Internet. You can deny specific port numbers or all ports for a specific IP address. The screen will display well-known ports that are defined. To use them, click on the edit icon.
  • Page 32 DVG-G5402SP User’s Manual ADVANCED 2-2-1-4 MAC Filtering Use MAC Filters to deny computers within the local area network from accessing the Internet. You can either manually add a MAC address that are connected to the gateway. ADVANCED → Firewall Settings → MAC FILTERING Enable MAC Filtering: Check the box to deny from accessing Internet.
  • Page 33 DVG-G5402SP User’s Manual ADVANCED 2-2-1-5 Port Filtering Port filtering enables you to control all data that can be transmitted over routers. When the port used at the source end is within the defined scope, it will be filtered without transmission.
  • Page 34 DVG-G5402SP User’s Manual ADVANCED 2-2-1-6 STUN Inquiry Use “STUN Inquiry” to detect your IP sharing device’s NAT type and communication between a STUN server and client. ADVANCED → Firewall Settings → STUN INQUIRY NAT Type: It shows the NAT type of your router.
  • Page 35 DVG-G5402SP User’s Manual ADVANCED 2-2-1-7 Virtual Server Virtual Server is used to allow Internet users access to LAN services. ADVANCED → Firewall Settings → VIRTUAL SERVER Enable Virtual Server: Check the box to enable port forwarding. WAN Port Range: Enter the port range for the WAN side.

  • Page 36: Nat Traversal

    DVG-G5402SP User’s Manual ADVANCED 2-2-2 NAT Traversal If your gateway is set up behind an Internet sharing device, you can select either the NAT or STUN protocol. ADVANCED → NAT TRAVERSAL NAT Public IP: Check the box to use the IP address of the Internet sharing device if the gateway is set up behind an Internet sharing device.

  • Page 37: Voip

    DVG-G5402SP User’s Manual ADVANCED 2-2-3 VOIP 2-2-3-1 Caller Filter This function allows you to accept or reject any incoming call from the IP address listed in the filter rule. The call from the IP address of SIP proxy server is always accepted, despite Deny is selected or the IP address of SIP proxy server is not in the filter rule of Allow.
  • Page 38 DVG-G5402SP User’s Manual ADVANCED 2-2-3-2 Caller ID ADVANCED → VoIP → CALLER ID FXS Caller ID Generation: Select DTMF or FSK to enable the caller ID display function on FXS ports. When enabled, the caller’s phone number will be displayed on your phone set when the call comes through.
  • Page 39 DVG-G5402SP User’s Manual ADVANCED ADVANCED → VoIP → CALLING FEATURES Call Hold: Check the box to hold the call on the specific FXS port. Note: Call Transfer or Call Waiting can only be activated when Call Hold is checked.. Call Transfer: Check the box to transfer the call to another destination (FXS port only).
  • Page 40 DVG-G5402SP User’s Manual ADVANCED 2-2-3-4 Codec Settings ADVANCED → VoIP → CALLING FEATURES Preferred Codec Type: Select a preferred codec type for all calls. Since different voice codecs have different compression ratios, the sound quality and occupied bandwidths are also different. The factual codec may determine by the called party.
  • Page 41 DVG-G5402SP User’s Manual ADVANCED 2-2-3-5 CPT/Cadence Settings The CPT has 2 sets of parameter tables. Please adjust the CPT based on the local PSTN or PBX settings and requirements. ADVANCED → VoIP → CPT / CADENCE SETTINGS D-Link Systems, Inc.
  • Page 42 DVG-G5402SP User’s Manual ADVANCED 2-2-3-6 Digit Map Digit Map combines the original feature of Digit Map and Speed Dial. You can use “?” or “%” in the column of Scan Code, VoIP Dial-out and PSTN Dial-out. “?” represents a single digit, and “%” represents a wildcard.
  • Page 43 DVG-G5402SP User’s Manual ADVANCED ADVANCED → VoIP → DIGIT MAP Enable: Check the box to enable the detection of Digit Map Rule entry. Scan Code: Enter the digits for the gateway to scan while user is dialing. VoIP Dial-out: Enter the actual dialing number rule for the gateway to call through the Internet.
  • Page 44 DVG-G5402SP User’s Manual ADVANCED Methods of Digit Map: Method 1- Single mapping: Fill a short code into the Scan Code column, and enter the desired phone number into the VoIP Dial-out column. For example, Scan Code: 55 VoIP Dial-out: 07021234567...
  • Page 45 DVG-G5402SP User’s Manual ADVANCED Method 2- Multi mapping: Fill the prefix code into the Scan Code column and the format to transfer into the VoIP Dial-out column. For example, Scan Code: 2??? VoIP Dial-out: 35106??? User Dial Length: 4 Route: VoIP Pick up the handset and dial 2301.
  • Page 46 DVG-G5402SP User’s Manual ADVANCED Pick up the handset and dial 0423456789. The gateway will dial 0423456789 and go through Internet first. If the call is fail to Internet, the gateway will dial 1805423456789 and go through PSTN/FXO. You also can use Digit Map Testing to see the result of what gateway will dial.
  • Page 47 DVG-G5402SP User’s Manual ADVANCED 2-2-3-7 DTMF & PULSE ADVANCED → VoIP → DTMF & PULSE Dial Wait Timeout: Enter the timeout duration after the user picks up the phone set. Inter Digits Timeout: Enter the timeout duration between the intervals of each key pressed. When exceeding the set timeout duration without entering further digits, the numbers entered will be dialed out.
  • Page 48 DVG-G5402SP User’s Manual ADVANCED 2-2-3-8 Fax Settings ADVANCED → VoIP → FAX SETTINGS Fax / Modem: Select the appropriate type for fax detection by the gateway. Disable - Select it if you are not sending fax, but it is still accepted fax by the gateway.
  • Page 49 DVG-G5402SP User’s Manual ADVANCED 2-2-3-9 Hot Line ADVANCED → VoIP → HOT LINE Enable: Check the box to enable the Hot Line function for a dedicated line; if the line is not being used, disable them (Pause Function) will avoid unnecessary waiting when an incoming call diverts to this line.
  • Page 50 DVG-G5402SP User’s Manual ADVANCED 2-2-3-10 Line Settings ADVANCED → VoIP → LINE SETTINGS Listening Volume: Use the drop-down menu to adjust the hearing (listening) volume. Speaking Volume: Use the drop-down menu to adjust the speaking volume. Tone Volume: Use the drop-down menu to adjust the tone volume. It will apply to all tones generated by the gateway including Dial Tone, Ring Back Tone and Busy Tone.
  • Page 51 DVG-G5402SP User’s Manual ADVANCED CO Line Type: Select PSTN (48V) or PABX (24V) for the CO line type connected to PSTN port. FXS Chip Option 1: Check the box to avoid mis-detecting the loop state of a subscriber line or PBX user loop from FXS interface.
  • Page 52 DVG-G5402SP User’s Manual ADVANCED ADVANCED → VoIP → LINE SETTINGS FXS Impedance: Select different impedance from the drop-down menu. ADVANCED → VoIP → LINE SETTINGS This feature is a call drop standard for a gateway to determine whether or not to hang up the phone. The gateway will disconnect the call automatically to avoid keeping the line engaged if the detected volume is below the Silence Detection Threshold or the time exceeds the Drop Silent Call Timeout.
  • Page 53 DVG-G5402SP User’s Manual ADVANCED 2-2-3-11 Phone Book Some peer information needs to be added to this section before the gateway makes peer-to-peer calls. Phone Book Manager: You can register the gateway to a Phone Book Manager server to make peer-to-peer communication without entering the phone number and the IP address of the remote peer.
  • Page 54 DVG-G5402SP User’s Manual ADVANCED ADVANCED → VoIP → PHONE BOOK The gateway can be configured and stored 100 phone numbers to a phone book and can provide an IP address query when calling to other VoIP devices. If no Phone Book manager is dedicated within a gateway group, then each gateway system have to set up phone data to allow gateways to communicate with others.
  • Page 55 DVG-G5402SP User’s Manual ADVANCED ADVANCED → VoIP → SIP ADVANCED Session Expiration: This field will set the time that the gateway will allow a SIP session to remain die (without traffic) before dropping it. Session Refresh Request: Select UPDATE or re-INVITE to send refresh requests to the Server.
  • Page 56 DVG-G5402SP User’s Manual ADVANCED VoIP failure announcement: Check the box to play a voice announcement if the gateway fails to register to the SIP proxy server while FXS is off-hook. Bind Proxy Interval for NAT: Check the box to keep the binding exist by sending packets when the gateway is behind a NAT and SIP proxy server is not able to keep the binding.
  • Page 57 DVG-G5402SP User’s Manual ADVANCED Invite URL need ‘user=phone’: Check the box to add ‘user=phone’ as a hint that the part left to the '@' sign is actually a phone number. Reliability of Provisional Responses: Check the box to send a PRACK request during the progress of the request processing.

  • Page 58: Maintenance

    DVG-G5402SP User’s Manual MAINTENANCE 2-3 MAINTENANCE 2-3-1 Firmware Upgrade The gateway supports a software upgrade function from a remote server. Please consult your VoIP Service Provider for information about the following details. MAINTENANCE → FIRMWARE UPGRADE Upgrade Server: Select the upgrade type: TFTP, FTP, or HTTP.

  • Page 59: Login Account

    DVG-G5402SP User’s Manual MAINTENANCE 2-3-2 Login Account MAINTENANCE → LOGIN ACCOUNT Note: There are two operating levels when entering the Web UI. Logging-in as the Administrator allows you to change all settings. A Web UI user only has access to some settings.

  • Page 60: Ping Test

    DVG-G5402SP User’s Manual MAINTENANCE 2-3-3 Ping Test Use “Ping” to verify if a remote peer is reachable. Enter a remote IP address and click “Test” to ping the remote host. MAINTENANCE → PING TEST D-Link Systems, Inc.

  • Page 61: System

    The current system settings can be saved as a file onto the local hard drive. The saved file or any other saved setting file created by the DVG-G5402SP can be uploaded into the unit. To restore a system settings file, click on Browse to search the local hard drive for the file to be used.

  • Page 62: System Log

    2-3-4-2 Save / Restart MAINTENANCE → System → SAVE / RESTART Save Settings: Check the box to save your current settings. Restart: Check the box and click the Accept button to reboot your DVG-G5402SP. 2-3-5 System Log MAINTENANCE → SYSTEM LOG Enable: Check the box to send event notification messages across IP networks to the Server.

  • Page 63: Provision Settings

    MAINTENANCE 2-3-6 Provision Settings Provisioning is a function that automatically updates your DVG-G5402SP’s VoIP configuration by using a TFTP, FTP, or HTTP server located on the Internet. If you have access to such service, you will need to know the URL or IP address of the Provisioning Server.
  • Page 64 DVG-G5402SP User’s Manual MAINTENANCE MAINTENANCE → PROVISION SETTINGS Binding Server for Trigger: Check the box to trigger a connection between Provisioning Server and the gateway. Provisioning Server will bind a port for the gateway to send provision request. Binding Port: Enter the port number of Provisioning Server is used for binding.

  • Page 65: Status

    DVG-G5402SP User’s Manual STATUS 2-4 STATUS 2-4-1 Current Status MAINTENANCE → CURRENT STATUS For Port Status, it includes if each port registers to Proxy successfully, the last dialed number, how many calls each port has made since the gateway is start, etc.

  • Page 66: System Information

    DVG-G5402SP User’s Manual STATUS 2-4-2 System Information MAINTENANCE → SYSTEM INFORMATION For WAN Port Information, it shows IP address, subnet mask, default gateway and DNS server. If you use PPPoE to obtain IP, you will know if the IP is obtained through this method. If IP address, subnet mask, default gateway is blank, it means that the gateway does not obtain IP.

  • Page 67: Rtp Packet Summary

    DVG-G5402SP User’s Manual STATUS 2-4-3 RTP Packet Summary MAINTENANCE → RTP PACKET SUMMARY Display the information of the last call made. Press Refresh button to get the latest RTP Packet Summary. 2-4-4 Logout If setting or parameter has been changed, remember to save the changes before you logout the configuration menu.

  • Page 68: Configuring The Gateway Through Ivr

    DVG-G5402SP User’s Manual Gateway Configuration-IVR 3. Configuring the Gateway through IVR VoIP transmits voice data (packets) via the Internet, hence the condition and status of the network environment is relatively important to the telecommunications quality. If any one of the parties involved in VoIP communications has insufficient bandwidth or frequent packet loss, the telecommunication quality will be poor.
  • Page 69 DVG-G5402SP User’s Manual Gateway Configuration-IVR Once the setting or query has been completed, you can hear a dial tone. Use the same procedure to make a second query or setting. To exit IVR mode, simply hang up the phone. Example: enter “**#” (you are now in IVR mode) enter 101 (to query the current IP address) system responds with an IP address.

  • Page 70: Ivr Functions Table

    DVG-G5402SP User’s Manual Gateway Configuration-IVR 3-1-1 IVR Functions Table: Function Description Example / Notes Code 111/101 WAN Port IP address Set/Query Dial function code 114 and then dial 1 for a Static IP connection then 112/102 WAN Port Subnet Mask Set/Query setup the IP address.

  • Page 71: Ip Configuration Settings-Set The Ip Configuration Of The Wan Port

    DVG-G5402SP User’s Manual Gateway Configuration-IVR 3-2 IP Configuration Settings—Set the IP Configuration of the WAN Port Static IP Settings Note: Complete static IP settings should include a static IP (option 1 under 114), IP address (111), Subnet Mask (112), and Default Gateway (113). Please contact your Internet Service Provider (ISP) if you have any question.
  • Page 72 DVG-G5402SP User’s Manual Gateway Configuration-IVR Select a PPPoE After entering IVR mode, dial 114. When voice prompt plays “Enter value,” dial 3 (to select PPPoE). PPPoE Account Settings After entering IVR mode, dial 121. When voice prompt plays “Enter value”, enter the account number followed by”#”.

  • Page 73: Pppoe Character Conversion Table

    (high-lighted) of each pair of the column (“Input Key”) represents the codes to be entered for the corresponding numbers, alphabets or symbols. For example, to enter “D-Link” according to the table below, enter: 148322495451 Numbers...

  • Page 74: Dialing Principles

    DVG-G5402SP User’s Manual Dialing Principles 4. Dialing Principles 4-1 Dialing Options Dial the phone number which you want to call and press # to call out immediately. Note that if the “# (pound)” not dialed, the number will be called out after 4 seconds by default. The period between number dialed and call out is named “Inter Digits Timeout”.
  • Page 75 DVG-G5402SP User’s Manual Dialing Principles Start Enter a phone number (D#) Is (D#) Dial the number defined in Speed defined in Dial table? Speed Dial table Is (D#) defined in Extension table? Is (D#) defined in Phone Book table? Is (D#)

  • Page 76: Appendix

    DVG-G5402SP User’s Manual Appendix Appendix Product Features • One 10/100Mbps auto-negotiation, auto-crossover RJ-45 Ethernet port • Support static IP, PPPoE, BigPond Cable and DHCP address assignment and dynamic DNS (DDNS) • QoS: IP TOS (Type of Services) and DiffServ (Differentiated Services) for both SIP signaling and RTP •...
  • Page 77 DVG-G5402SP User’s Manual Appendix Configuration & Maintenance • Configuration methods: Telnet • Status reports: Port status Registration status Ping tests STUN/UPnP status Hardware / software information • Firmware Upgrade through TFTP, FTP and proprietary image server • Configuration Backup/Restore •...
  • Page 78 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Table of Contents