Table of Contents
Advertisement
DVG-5112S User's Manual
Advanced Voice Services
DVG-5112S provides function for advanced voice settings, such as FAX, Codec, Speaking and Listening
volume, etc.
Line Settings
You can adjust listening volume, speaking volume and tone volume here.
DVG-5112S
Item
Listening Volume
Speaking Volume
Tone Volume
Min. FXS Hook Flash Time
Flash Time
Enable Polarity Reversal
FXS Chip Option 1
D-Link Systems, Inc.
Description
It is to adjust the hearing volume.
It is to adjust the speaking volume.
It is to adjust the tone volume. It will be applied to all tones volume
generated by DVG-5112S including Dial Tone, Busy Tone, and so
on.
It is to set the minimum flash time for FXS detecting.
It is to adjust the maximum detecting period of flash signal from the
phone set connected to the FXS port. For example, if pressing the
HOLD key will disconnect a call, increase the "Flash Detect Time"
should fix this issue.
As the remote party answer this call, the polarity will be reversed.
It is to avoid mis-detecting the loop state of a subscriber line or PBX
user loop by FXS interface. In some places, the voltage of off-hook
makes it mis-detect the idle state and the active state by FXS
interface. Untick this variable if it mis-detects the state by FXS
interface in your place.
41
Advertisement
Table of Contents
