Table of Contents
Advertisement
DVG-5112S User's Manual
IP Configuration Settings—Setting IP Configuration of WAN Port
Static IP Settings
Note: Before setting Static IP, you must have IP address (111), Subnet Mask (112) and Default Gateway
(113) provided by your local Internet Service Provider (ISP).
Function
Select a Static IP
IP address Settings
Subnet Mask Settings
Default Gateway Setting
Save Settings and Restart
Dynamic IP (DHCP) Settings
After entering IVR mode, dial 114.
You will hear "Enter value",
Dial 2 to select DHCP.
Dial 509 to save settings.
Dial 118 to reboot DVG-5112S.
Wait for about 40 seconds for restart, and then enter 101 to check if the IP address is retained. If the IP
address is not repeated, DVG-5112S has not been successfully connected to the Internet, please check if
the cable connection is correct.
D-Link Systems, Inc.
Command
After entering IVR mode, dial 114.
After hearing "Enter value", dial 1 (select static IP)
After entering IVR mode, dial 111. After hearing "Enter value", enter
your IP address and # (speed up dialing).
Example: If the IP address is 192.168.1.200, dial 192*168*1*200#.
After entering IVR mode, dial 112. After hearing "Enter value", enter
your subnet mask and # (speed up dialing).
Example: If the mask value is 255.255.255.0, dial 255*255*255*0#.
After entering IVR mode, dial 113. After hearing "Enter value", enter
your default DVG-5112S's IP address and # (speed up dialing).
Example: If the Default Gateway is 192.168.1.1, dial 192*168*1*1#.
Dial 509 to save settings.
Dial 118 to reboot DVG-5112S.
Wait for about 40 seconds for restart, and then enter 101 to check if the
IP address is retained. If the IP address is not repeated, DVG-5112S
has not been successfully connected to the Internet, please check if the
cable connection and IP address are correct.
66
Advertisement
Table of Contents
