Table of Contents
Advertisement
DVG-5112S User's Manual
SIP Message Timeout Adjustment
Item
SIP Message Resend Timer
Base
Max. Response Time for Invite
SIP Proxy Server / Soft Switch Settings
Item
VoIP failure announcement
Bind Proxy Interval for NAT
Initial Unregister
Support Message Waiting
Indication (MWI)
D-Link Systems, Inc.
Description
SIP packet will resend if response dose not arrive in the base time
set in this column. The max of resend time is 4 sec.
It will send again at "base time" *2, and send again at
"base time" *2 *2. Resend will stop/restart when total resend 20sec
has reached.
If the remote party does not reply in the set time after the first invite,
this call is failed.
Description
As soon as the registration to proxy server is failed, DVG-5112S will
drive IVR system to play out failure announcements for the user.
DVG-5112S will always send two packets in N seconds to VSP to
bind the tunnel. The VSP can always send SIP packets to
DVG-5112S that is setup behind an NAT.
DVG-5112S will send un-register packet to VSP as it is initialing.
Tick the check box to enable voice mail function. DVG-5112S will
play a tone to notify user if there are messages in the voice mail.
35
Advertisement
Table of Contents
