Table of Contents
Advertisement
DVG-5112S User's Manual
ADSL PPPoE Settings
NOTE: Before setting PPPoE, you must have PPPoE account (121) and PPPoE password (122) provided
by your local Internet Service Provider (ISP).
Select a PPPoE
After entering IVR mode, dial 114.
You will hear "Enter value".
Dial 3 to select PPPoE.
Set PPPoE account
After entering IVR mode, dial 121.
You will hear "Enter value".
Enter account number and # (speed up dialing).
Example: If the account is "84943122 @ hinet.net", please enter 08 04 09 04 03 01 02 02 71 48 49 54 45 60 72 54 45 60 #.
Please note that it is necessary to enter two digits for each character/number; for example, enter 01 for 1
and 11 for A.
PPPoE Password Setting
After entering IVR mode, dial 122.
You will hear "Enter value".
Enter password number and # (speed up dialing).
Example: If the password is "3ttixike", please enter "03 60 60 49 64 49 51 45#".
Save Settings and Restart
Dial 509 to save settings.
Dial 118 to reboot DVG-5112S.
Wait for about 40 seconds for restart, and then enter 101 to check if the IP address is retained. If the IP
address is not repeated, DVG-5112S has not been successfully connected to the Internet, please check
if the cable connection, account, or password are correct.
.
D-Link Systems, Inc.
67
Advertisement
Table of Contents
