Download Print this page
   

Advertisement

Quick Installation Guide
DVG-5004S
VoIP Gateway
©2010 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications subject to change without notice. DVG-5004S FXS
VoIP Gateway
DVG-5004S
CD-ROM
which includes
the User
Manual
Phone Cord X4
Ether
Power
(CAT5 UTP)
Adaptor
Cable
Using a power
supply with a
different
voltage rating
will damage
this product
and void the
warranty

Advertisement

   Related Manuals for D-Link dvg-5004s

   Summary of Contents for D-Link dvg-5004s

  • Page 1: Quick Installation Guide

    ©2010 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DVG-5004S FXS VoIP Gateway...

  • Page 2: Hardware Overview

    Hardware Overview Power LED. A steady light indicates a proper connection to a Power power source. A blinking light indicates the VoIP Gateway is attempting to connect with the Provisioning server or DVG can’t get IP Prov./Alm. from DHCP or PPPoE Server. Once the service connects, the LED will turn off.

  • Page 3: Rear Panel

    Rear Panel Phone Port (1-4): Connect to your phones using standard phone cabling (RJ-11). LAN: Connect to your Ethernet enabled computers using Ethernet cabling. WAN: Connect to your broadband modem using an Ethernet cable. Ground: A conducting connection with the earth. Connect with the ground so as to make the earth a part of an electrical circuit using metal wire.

  • Page 4: Installing The Hardware

    Installing the Hardware A. Insert one end of the Ethernet cable into the Ethernet (LAN) port on the back panel of the DVG-5004S and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.

  • Page 5

    D. Connect the power adapter to the power input at the back panel of the DVG-5004S and then plug the other end of the power adapter to a wall outlet or power strip. Then press down Powr Switch. On the front of the device, the Power LED will turn On to indicate proper operation.

  • Page 6

    Configuration To access the web-based configuration utility, open a web browser such as Internet Explorer and enter the IP address of the DVG-5004S. Open your Web browser and type http://192.168.8.254 into the URL address box. Press the Enter or Return Key.

  • Page 7

    Configuration (continued) It is highly recommended to create a login ID and password to keep your gateway secure. Click Next. Enter a NTP server or use the default server. Click Next.

  • Page 8

    Configuration (continued) Select your Internet connection type: DHCP – Most Cable ISPs or if you are connecting the DVG- 5004S behind a router. Static IP – Select if your ISP supplied you with your IP settings. PPPoE – Most DSL ISPs. PPTP –...

  • Page 9

    ITSP. Click on the Register check box to register to Proxy Server. Click Next. Setup is finished. Check the summary of your settings. To make new settings effective, you must click on the Restart button to reboot the DVG-5004S. Click Restart.

  • Page 10: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers within United States: D-Link Technical Support over the Telephone: (800)326-1688 D-Link Technical Support over the Internet: http://support.dlink.com email:support@dlink.com...

Comments to this Manuals

Symbols: 0
Latest comments: