Table of Contents
Advertisement
DVG-5112S User's Manual
Item
Ring (Early Media) Time Limit
Enable End of Digit Tone
Early Media Treatment
Loop Current Drop Trigger Time
Loop Current Drop Duration
Enable ROH
Termination Impedance
Choose correct impedance in your country/area. The wrong impedance will cause voice failure.
D-Link Systems, Inc.
Description
Specify the interval of ring time to cancel a call when no one answers
a call.
DVG-5112S will play a "Beep-Beep" tone to notify the call is in
progress. It will play when invite packet is sent.
It refers to media that is delivered before call answer to inform the
remote user about the session establishment. If you fail to make a
call, please disable it.
It is to set the trigger time for dropping loop current by FXS port. A
setting of zero is to disable this function. It is used to avoid the line
engaged if FXS port is connected to PBX.
It is to set the drop duration.
DVG-5112S will play Receiver Off-Hook tone to notify user of
hanging up the phone set.
42
Advertisement
Table of Contents
