System Tools - D-Link DFL-900 User Manual

System Tools

Step 5 ¡ Ð Setup DDNS
If the IP address of DFL-900 WAN port is dynamic
allocated. You may want to have the Dynamic
DNS mechanism to make your partner always
use the same domain name (like xxx.com) to
connect to you. Select a WAN interface to
update the DDNS record. Here we supply two
DDNS Service Providers. Fill in the Host
Name, Username, Password supplied by the
DDNS web site. Please refer to the DDNS web
site for the detail information. Click Apply to
activate the settings.
FIELD
Enable DDNS for WAN1
Interface
Service Provide
Hostname
Username
Password
Step 6 ¡ Ð Setup DNS Proxy
Check the Enable DNS Proxy and click the
Apply to store the settings. From now on, your
LAN/DMZ PCs can use DFL-900 as their DNS
server, as long as the DNS server for DFL-900
has been set in its WAN settings.
FIELD
Enable DNS Proxy
SYSTEM TOOLS > Admin Settings > DDNS
Enable DDNS feature of DFL-900
Assign which public IP address of interface to the DDNS server.
The domain address of DDNS server. In the DFL-900, we provide
www.DYNDNS.org and www.DHS.org two websites for choice.
The registered Hostname in the DDNS server.
The registered username in the DDNS server.
The registered password in the DDNS server.
Table 4-4 System Tools – DDNS setting page
SYSTEM TOOLS > Admin Settings > DNS Proxy
When the host of the LAN/DMZ sends a DNS Request, DFL-900 will
request for forwarding it to the DNS server of the WAN link. When there
is a response from DNS, DFL-900 will forward it back to the host of the
LAN/DMZ.
Table 4-5 System Tools – DNS Proxy menu
DESCRIPTION
DESCRIPTION
25
DFL-900 User Manual
EXAMPLE
Enabled
WAN1
WWW.DYNDNS.ORG
abc.com
user
1234567
EXAMPLE
Enabled