Table of Contents
Advertisement
Trouble Shooting
b.
You can use supplied console to login into the DFL-900 system and then logout the system. That will clean up the
zombie left in the system so you will be able to login to the DFL-900 from the same side.
c.
The final way is to power off the DFL-900, and then turn on the power. After DFL-900 reboot, you can login into
DFL-900 again.
7.
Why does it always show the message as Figure 18-4 indicated when I try to enable bandwidth management feature of
DFL-900?
Figure 18-4 Bandwidth management feature can not cooperate with PPPoE feature
Ans £ º
For the present design, you can not turn on bandwidth management in the PPPoE enabled condition. If you need to enable
bandwidth management, please choose the WAN connection method (ex. DHCP, fixed IP).
Figure 18-3 Login process is locked by the web configurator
105
DFL-900 User Manual
Advertisement
Table of Contents
