Table of Contents
Advertisement
D-Link
Step 4 ¡ Ð
Check if OK
18.3 Steps for Firmware upgrade from Web GUI
Step 1 – Download the newest firmware
from web site
Step 2 – Upgrade firmware
In the System Tools / Firmware Upgrade page.
Select the path of firmware through Browse
button, and check the Preserve Current
System Settings to reserve original settings.
Click the Upload button to upgrade firmware.
ASIC IPSec Enabled
Ethernet address 00:80:c8:50:fa:ba, 10/100 Mb/s
Ethernet address 00:80:c8:50:fa:bb, 10/100 Mb/s
Ethernet address 00:80:c8:50:fa:bc, 10/100 Mb/s
wd0: drive supports PIO mode 4
IPsec: Initialized Security Association Processing.
Current WAN1 IP = 192.168.17.87
Netmask = 0xffffff00
Gateway = 192.168.17.254
Primary DNS = 168.95.1.1
Secondary DNS =
Resuming NAT/RMS/FW settings......
Starting Web-based Configurator......
HTTP started
HTTPS started
Wed Sep 10 18:13:23 2003
NetOS/i386 (DFL-900) (tty00)
login:
Firmware upgrade site¡ G
http://fwupdate.dlinktw.com.tw/
100
Part VII
Advertisement
Table of Contents
