D-Link DFL-900 User Manual page 61

Virtual Private Network – IPSec
Step 2 ¡ Ð Add a Manual Key rule
Click the Manual Key hyperlink and click Add to
add a new IPSec VPN tunnel endpoint.
Step 3 ¡ Ð Customize the rule
Same as those in IKE. But there is no pre-shared
key in the manual-key mode. Enter the Key for
encryption, such as 1122334455667788. Enter
the for authentication,
Key
11112222333344445555666677778888.
Additionally, the Outgoing SPI and Incoming
SPI have to be manually specified. Enter 2222
and 1111 respectively to the Outgoing SPI and
the Incoming SPI. Click Apply to store the rule.
Active
Status
Manual Key Rule Name
Condition Local Address Type
IP Address
Prefix Len/Subnet Mask
ADVANCED SETTINGS > VPN Settings > IPSec > Manual Key
ADVANCED SETTINGS > VPN Settings > IPSec > Manual Key > Add
such as
FIELD
This field will activate this IPSec policy rule
The name of this IPSec policy
Determine the method to connect to the remote side of
VPN by using the local subnet or the local single host.
The local IP address
The local IP Netmask
DESCRIPTION
57
DFL-900 User Manual
EXAMPLE
enabled
ManualKeyrule
Subnet Address
192.168.40.0
255.255.255.0