Table of Contents
Advertisement
D-Link
10.4 Steps
Step 1 – Enable PPTP
Check the Enable PPTP checkbox, enter the
LAN1_IP of the DFL-1(192.168.40.254) in the
Local IP, and enter the IP range that will be
assigned to the PPTP clients in the Start IP
Enter the Username
and the End IP fields.
and Password that will be used by the
employees
during
dial-up.
preferred Authentications and c
Apply.
FIELD
Enable PPTP
Local IP
Start IP
End IP
Username
Password
Authentication
Step 2 – Setup Windows XP/2000 PPTP
clients
ADVANCED SETTINGS > VPN Settings > PPTP
Check
the
lick the
Enable PPTP feature of the DFL-900
The Local IP is the allocated IP address in the internal Network after PPTP
client dials in the DFL-900.
The Start IP is the allocated starting IP address in the internal network after
PPTP client dials in the DFL-900.
The End IP is the allocated ending IP address in the internal network after
PPTP client dials in the DFL-900.
The account which allow PPTP client user to dial in DFL-900.
The password which allow PPTP client user to dial in DFL-900.
Determine the authentication method, chap / chapms / chapms-v2
Table 10-1 Setup PPTP Server
Configuring A PPTP Dial-Up Connection
1. Configuring a PPTP dial-up connection
2. Go to Start > Control Panel > Network and Internet
Connections > Make new connection.
3. Select Create a connection to the network of your
workplace and select Next.
4. Select Virtual Private Network Connection and select Next.
5. Give a Name the connection and select Next.
6. If the Public Network dialog box appears, choose the Don't dial
up initial connection and select Next.
7. In the VPN Server Selection dialog, enter the public IP or
hostname of the DFL-900 to connect to and select Next.
8. Set Connection Availability to Only for myself and select
Next.
9. Select Finish.
DESCRIPTION
62
Part III
EXAMPLE
enabled
192.168.40.254
192.168.40.200
192.168.40.253
PptpUsers
Dif3wk
chap
Advertisement
Table of Contents
