Table of Contents
Advertisement
Section 3 - Configuration
Go to Management > System Admin, then click System. This page allows you to save the router's current configuration,
load a previously saved configuration, reset the router to its factory default settings, or reboot the router.
To configure the Admin settings, click the Admin tab. Refer to System Admin - Admin on page 89
Click Save at any time to save the changes you have made on this page.
Save Settings to Local
This option will save the current router configuration settings
Hard Drive
to a file (bin type) on your computer.
Load Settings from
This option will load a previously saved router configuration
Local Hard Drive
file. This will overwrite the router's current configuration.
Restore to Factory
This option will restore the router back to the default
Default Settings
configurations stored in the firmware. Any settings that have
not been saved will be lost, including any rules that you have
created. If you want to back up the current router configuration
settings before restoring to factory defaults, use the Save
Settings to Local Hard Drive function above.
Auto Reboot Configuration
Reboot the Device
Click this button to reboot the router immediately.
Auto Reboot
You may set the router to automatically reboot at a set time.
The options are Never, Daily, or Weekly. You may set the day,
and hour and minute of the day for automatic reboot.
D-Link G416 User Manual
System Admin - System
System
90
Advertisement
Table of Contents
