Wiring The Dfl-900 - D-Link DFL-900 User Manual

D-Link
Items
Password:
IP Address
Subnet Mask
Gateway IP
WAN1
Primary DNS
(Port 1)
Secondary DNS
PPPoE Username
PPPoE Password
IP Address
LAN1
(Port 2)
IP Subnet Mask
IP Address
DMZ1
(Port 3)
IP Subnet Mask
1.4

Wiring the DFL-900

A. First, connect the power cord to the socket at the back panel of the DFL-900 as in Figure 1-2 and then
plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to
indicate proper operation.
B. Using an Ethernet cable, insert one end of the cable to the WAN port on the front panel of the DFL-900
and the other end of the cable to a DSL or Cable modem, as in Figure 1-3.
C. Computers with an Ethernet adapter can be directly connected to any of the LAN ports using a
cross-over Ethernet cable, as in Figure 1-3.
D. Computers that act as servers to provide Internet services should be connected to the DMZ port using an
Ethernet Cable, as in Figure 1-3.
Default value
admin
Not initialized
192.168.1.254
255.255.255.0
10.1.1.254
255.255.255.0
Table 1-1 DFL-900 related network settings
Figure 1-2 Back panel of the DFL-900
4
New value
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
A. Power Socket
Part I