Table of Contents
Advertisement
D-Link
12.4 Steps
Step 1 ¡ Ð
Enable Web Filter
Check the Enable Web Filter checkbox and
click the Apply right on the right side.
Step 2 ¡ Ð
Warning of Firewall
This is a warning saying that if you block any web
traffic from LAN-to-WAN in Firewall, the access
control is shift to the Web Filter. Namely, if you
block someone to access the web at the WAN
side, after enabling the web filter, he can resume
accessing the web until you set a content filter
rule to block it.
Step 3 ¡ Ð
Customize Objects
Check the objects of Restricted Features to
block the objects. Click the Apply button at the
bottom of this page.
Use PC1_1 to browse the
web page to see if the objects are blocked. If the
objects still exist, the objects may be cached by
the browser. Please clear the cache in the web
browser, close the browser, reopen the browser,
and connect to the web page again.
FIELD
Enable Web Filter
Restricted Features
ADVANCED SETTINGS > Content Filters > Web Filter
ADVANCED SETTINGS > Content Filters > Web Filter
ADVANCED SETTINGS > Content Filters > Web Filter
Enable Web Filter feature of DFL-900
Setting up the component (Include ActiveX, Java, Java Script, Cookies,
Web Proxy)
Table 12-1 Web Filter Web setting page
DESCRIPTION
72
Part IV
EXAMPLE
enabled
Advertisement
Table of Contents
