Table of Contents
Advertisement
D-Link
Step 4 ¡ Ð
Check NAT Status
The default setting of NAT is in Basic Mode.
After applying the Step 3, the NAT is
automatically configured with two rules to let all
private-IP LAN1/DMZ1-to-WAN1 requests to be
translated with the public IP assigned by the ISP.
Step 5 ¡ Ð
Check NAT Rules
The DFL-900 has added two NAT rules. The rule
Basic-DMZ1 (number 1) means that, when
matching the condition (requests of
LAN/DMZ-to-WAN direction with its source IP
falling in the range of
10.1.1.254/255.255.255.0), the request will
be translated into a public-source-IP requests,
and then be forwarded to the destinations.
Step 6 ¡ Ð
Setup IP for the FTP Server
Assign an IP of 10.1.1.1/255.255.255.0 to the
FTP server under DMZ1. See Appendix for
assistance. Assume the FTP Server is at
10.1.1.5. And it is listening on the well-known port
(21).
Step 7 ¡ Ð
Setup Server Rules
Insert a virtual server rule by clicking the Insert
button.
ADVANCED SETTINGS > NAT > Status
ADVANCED SETTINGS > NAT > NAT Rules
ADVANCED SETTINGS > NAT > Virtual Servers
36
Part II
Advertisement
Table of Contents
