Steps; Inbound Traffic Management - D-Link DFL-900 User Manual

D-Link

16.4 Steps

16.4.1 Inbound Traffic Management

Step 1 ¡ Ð Enable Bandwidth
Management
Check the Enable Bandwidth Management
checkbox, click the Apply.
FIELD
Enable Bandwidth
Management
Step 2 ¡ Ð Setup the LAN1 Link
Select ANY to LAN1 to setup traffic that will
transmit by the LAN1 interface. Enter the LAN1
interface bandwidth as 1544kbps. Click the
Apply button to enforce the LAN1 link bandwidth
to be 1544kbps. In the table, the root class
represents the whole bandwidth of the link. By
default the link is partitioned into two classes:
control class (ctl_class) and default class
(def_class). The control
bandwidth for control protocols such as ICMP,
TCP ACKs. The default class is the default action
of non-matched packets. The default class can be
recursively partitioned into more classes. The
classes are organized as a tree. Click Create
Sub-Class to partition the default class.
Step 3 ¡ Ð Add new classes
Create a sub-class named inFTP from the
default class. Enter 66% in the bandwidth field
and click Apply. Select the default class and
click the Create Sub-Class to create another
sub-class named inVideo from the default class.
Enter 29% in the bandwidth field, check the Let
other classes utilize any available
bandwidth of this class, and click Apply.
ADVANCED SETTINGS > Bandwidth Mgt. > Status
Enable Bandwidth Management feature of DFL-900
Table 16-1 Setup Bandwidth Management status page
ADVANCED SETTINGS > Bandwidth Mgt. > Edit Actions
class reserves
ADVANCED SETTINGS > Bandwidth Mgt. > Edit Actions > Create
Sub-class
DESCRIPTION
90
Part VI
EXAMPLE
enabled