D-Link
Step 3 ¡ Ð
Partition into Classes
Create a sub-class named LANa-to-LANb from
the default class. Enter 65% in the bandwidth
field and click Apply. Select the default class and
click the Create Sub-Class to create another
sub-class named Others from the default class.
Enter 30% in the bandwidth field, check the Let
other classes utilize any available
bandwidth of this class, and click Apply.
Now there are two actions under the default
action.
Step 4 ¡ Ð
Setup ANY-to-WAN1 Rules
Select ANY to WAN1 to display the rules. There is
a pre-defined rule that matches all traffic into the
default class. Click Insert to insert a rule before
the default rule.
Step 5 ¡ Ð
Customize the Rules
Same as that in inbound management.
ADVANCED SETTINGS > Bandwidth Mgt. > Edit Actions > Create
Sub-Class
ADVANCED SETTINGS > Bandwidth Mgt. > Edit Rules
ADVANCED SETTINGS > Bandwidth Mgt. > Edit Rules > Insert
94
Part VI