Table of Contents
Advertisement
D-Link
ESP Algorithm
AH Algorithm
Pre-Shared Key
Step 4 ¡ Ð
Detail settings of IPSec IKE
In this page, we will set the detailed value of IKE
parameter. Fill the related field to finish these
settings.
Local to Remote Protocol
/ Src Port / Dest Port
Condition
Remote to Local Protocol
/ Src Port / Dest Port
Action
Enable Replay Detection
Phase1
Select the Encryption and Authentication Algorithm
combination.
Select Authentication Algorithm (MD5 or SHA1)
The key which is pre-shared with remote side.
Table 9-2 Related field explanation of adding a IPSec policy rule
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add >
Advanced
FIELD
Utilize this field to select some packets which are
destined for a specified port (Dest Port) or coming from
specified port (Src Port) can use IPSec feature. The
direction is from local to remote.
Utilize this field to select some packets which are
destined for specified port (Dest Port) or coming from
specified port (Src Port) can use IPSec feature. The
direction is from remote to local.
Whether is the "Replay Detection" enabled?
Choose Main or Aggressive mode, see Chapter 8 for
Negotiation Mode
details.
View only, it is set previously and can not be edited
Pre-Shared Key
again.
DESCRIPTION
52
Part III
Encrypt and
Authenticate
(DES¡ B MD5)
Authenticate (MD5)
1234567890
EXAMPLE
TCP / 0 / 80
ANY / 0 / 0
NO
Main
ESP
Advertisement
Table of Contents
