Setting Hdd Groups; Setting Hdd Status; Figure 11-2 Hdd Group Settings Menu - Honeywell Performance HRG4 User Manual

92 | Performance Series DVR User Guide
4.

Setting HDD Groups

Your HRG DVR can separate multiple HDDs into groups. Video from specified channels can be
recorded to a particular HDD group.
To set up an HDD group:
1.
2.
3.
4.
5.

Setting HDD Status

You can change the behavior of your HDD by changing its status. The status of a HDD can be
set to read-only or read/write (R/W).
Setting an HDD to Read-Only
A HDD can be set to read-only to avoid important recorded files from being overwritten when
the HDD becomes full.
To set a HDD to read-only:
1.
2.
www.honeywellvideo.com
Click OK to start the initialization process.
After the HDD has been initialized, the status of the HDD will change from Abnormal to
Normal.

Click Menu HDD to enter the HDD Management menu.
Select the HDDs to be added to the group.
Click Group to enter the Group Settings menu (see
Set the HDD Group Number (see
Figure 11-2 HDD Group Settings Menu
Click OK to save settings and exit the Group Settings menu.
Note By default, all HDDs belong to Group 1.

Click Menu HDD to enter the HDD Management menu.
Select the HDD to be protected.
Figure
Figure 11-2).
11-1).