Figure 1-3 Hrg8 And Hrg16 Front Panel - Honeywell Performance HRG4 User Manual

18 | Performance Series DVR User Guide
HRG8 and HRG16 Front Panel
Position Button/Indicator
1 USB Port
2 Status Indicators
POWER
READY
STATUS
ALARM
HDD
Tx/Rx
3 IR Receiver
4 Compound Buttons
1/MENU
2/ABC/F1
3/DEF/F2
4/GHI/ESC
5/JKL/EDIT
6/MNO/PLAY
7/PQRS/REC
8/TUV/PTZ
9/WXYZ/PREV
0/A
5 SHIFT
6 Control Buttons
www.honeywellvideo.com
Figure 1-3 HRG8 and HRG16 Front Panel
Function
Connection for a USB mouse or USB flash memory device.
Turns green when the HRG DVR is on.
Turns green when the device is running normally.
Illuminates when the compound key switches to numeric/letter input mode.
Turns red when there is a sensor alarm occurring.
Flickers red when the HDD is reading or writing.
Flickers green when the network connection is functioning normally.
Sensor for IR Remote Controller.
Enter number "1"; Access the main menu.
Enter number "2" or letters "A", "B", "C"; The F1 button when used in a list field will
select all items on the list. In PTZ Control mode, it will turn on/off PTZ light.
Enter number "3" or letters "D", "E", "F"; The F2 button is used to cycle through tab
pages. It will also bring up the Channel & OSD Position settings.
Enter number "4" or letters "G", "H", "I"; Exit and back to the previous menu.
Enter number "5" or letters "J", "K", "L"; Delete characters before cursor; Select the
check box and ON/OFF switch; Start/stop record clipping in playback.
Enter number "6" or letters "M", "N", "O"; Playback, for direct access to playback
interface.
Enter number "7" or letters "P", "Q", "R", "S"; Manual record, for direct access to
manual record interface; manually enable/disable record.
Enter number "8" or letters "T", "U", "V"; Access to PTZ control interface.
Enter number "9" or letters "W", "X", "Y", "Z"; Multi-camera display in live view.
Enter number "0"; Switch between input methods (upper and lowercase alphabet,
symbols and numeric input).
Switches the compound keys functions from inputting the numeric/letter values to
the functional controls.
Directional buttons: In menu mode, the direction buttons are used to navigate
between different fields and items and select setting parameters. In playback mode,
the Up and Down buttons are used to speed up and slow down record play, and the
Left and Right buttons are used to select the recording 30s forwards or backwards.
In Live View mode, these buttons can be used to cycle through channels.
Enter: The Enter button is used to confirm a selection in the Menu mode; or used
to select check box fields and the ON/OFF switch. In playback mode, it can be used
to play or pause the video. In single-frame play mode, pressing the Enter button
advances the video by a single frame. And in auto sequence live view mode, the
buttons can be used to pause / resume auto sequence.