Configuring Pppoe Settings; Figure 8-2 Network Status - Honeywell Performance HRG4 User Manual

74 | Performance Series DVR User Guide
3.
4.
5.

Configuring PPPoE Settings

Your DVR also allows for Point-to-Point Protocol over Ethernet (PPPoE) access.
To set up PPPoE access:
1.
2.
www.honeywellvideo.com
If you want to configure your own settings, enter the settings for:
• IP Address: IP address you would like to use for your HRG DVR.
• Subnet Mask: Subnet Mask of network.
• Default Gateway: IP address of your Gateway. Typically the IP address of your router.
• Preferred/Alternate DNS Server: The preferred and alternate Domain Name System
(DNS) Server to be used with your HRG DVR.
If you have a DHCP server running and would like your DVR to automatically obtain an IP
address and other network settings from that server, select the DHCP check box. You can
check the DHCP status by going to the Network Status tab (see
Figure 8-2 Network Status
Click OK to save the settings and exit the menu.
 
Click Menu Settings
Select the Advanced tab to enter the Advanced Network Settings menu (see
Network to enter the Network Settings menu.
Figure 8-2).
Figure 8-3).