Customizing Patrols; Figure 9-4 Preset Management Menu; Figure 9-5 Patrol Management Menu - Honeywell Performance HRG4 User Manual

84 | Performance Series DVR User Guide

Customizing Patrols

Patrols can be programmed to move the PTZ to different key points and make it stay there for a
defined duration before moving on to the next point. The key points are defined by presets
which can be set by following the steps above in
To set up and call PTZ patrols:
1.
2.
www.honeywellvideo.com
Figure 9-4 Preset Management Menu
Note Only valid presets can be called and deleted.
Open the PTZ Control panel
pressing PTZ on the front panel of the DVR.
Click Patrol to enter the Patrol Management menu (see
Figure 9-5 Patrol Management Menu
Customizing
(Figure 9-3), by clicking PTZ in the mouse menu or by
Presets.
Figure 9-5).