Honeywell Performance HRG4 User Manual page 23

HRG8 Rear Panel Connections and Switches
HRG16 Rear Panel Connections and Switches
Position Connection/Switch
Main Video Out
1
Spot Video Out
2 Video In
3 Audio In
4 Line In
5 Audio Out
6 RS-232 Port
7 VGA
8 LAN
9 USB
10 RS-485 Port
Alarm In
11
Alarm Out
12 12 V
13 Power
14 GND
Table 1-6 HRG8 and HRG16 Rear Panel Connections and Switches
Function
BNC connectors for analog video input.
BNC connectors for spot video out
BNC connectors for analog video input.
RCA connectors for analog audio input.
RCA connector for audio input.
RCA connector for audio output.
DB9 connector for RS232 devices.
DB15 connector for VGA output. Display local video output and menu.
Connector for LAN (Local Area Network).
Connector for USB devices.
Connector for RS-485 devices. T+, T- pins connect to PTZ.
Connector for alarm input.
Connector for alarm output.
12 V DC power supply.
Switch for turning On/Off the device.
Ground (needs to be connected when HRG DVR starts up).
Introduction | 23
800-12005 - A - 06/2012