32 | Performance Series DVR User Guide
Setting the Date and Time
You must set up the system date and time to accurately timestamp recordings and events.
To set up the date and time:
1.
2.
3.
4.
www.honeywellvideo.com
Open the General Settings Menu by doing one of the following:
•
Press MENU on the remote control or the front panel of the HRG DVR.
•
Right-click with the mouse, and then click Menu.
Click Settings, and then click General to enter the General Settings menu.
Figure 2-12
Setting the Date and Time
Enter the correct date and time in the System Time field.
Click Apply to save the settings.