Figure 12-5 Add User Menu; Figure 12-6 Permission Settings Menu - Honeywell Performance HRG4 User Manual

Figure 12-5 Add User Menu
3. Enter information for the new user, including User Name, Password, Level, and User's
MAC Address.
4. The Level is the user level and is separated into two tiers:
• Operator: By default, the Operator user level has the authority to configure two-way
audio in network settings and all parameters in channel settings.
• Guest: By default, the Guest user level cannot configure network settings, but can
configure the local playback as well as the remote playing in channel settings.
5. If the User's MAC Address is configured and enabled, the user may only access the HRG
DVR from that particular MAC address.
6. Click Permission to enter the Permission Settings menu (see
Figure 12-6 Permission Settings Menu
7. Configure permission for local settings on the Local Permission tab.
HRG DVR Management | 101
Figure 12-6).
800-12005 - A - 06/2012