Rebooting And Locking The Hrg Dvr; Using The Setup Wizard; Figure 2-1 .Shutdown Menu - Honeywell Performance HRG4 User Manual

26 | Performance Series DVR User Guide
2.
3.

Rebooting and Locking the HRG DVR

While in the Shutdown menu, you can also reboot or lock your HRG DVR. Locking your HRG
DVR will return you to the Live View mode, which requires a user name and password to exit out
of it. The Reboot button reboots your HRG DVR.
1.
2.

Using the Setup Wizard

By default, the Setup Wizard prompt appears when you turn on the HRG DVR (see
The Setup Wizard guides you to configure some of the important settings for your HRG DVR.
www.honeywellvideo.com
Figure 2-1 .Shutdown Menu
Click ShutDown.
Click Yes in the pop-up window to confirm that you want to shut down the HRG DVR.

Click Menu ShutDown to enter the Shutdown menu (see
Click Lock or Reboot.
Note If the check box is cleared
factory default settings are resumed.
If the check box is selected
HRG DVR is turned on.
Figure
, then the Setup Wizard will not run again until the
, then the Setup Wizard will start the next time the
2-1).
Figure 2-2).