Video Tampering Detection; Figure 7-17 Handle Settings; Figure 7-18 Camera Settings Menu - Honeywell Performance HRG4 User Manual

68 | Performance Series DVR User Guide
8.
9.

Video Tampering Detection

The video tampering can also be detected and set to trigger an action on your DVR.
To set up video tampering detection:
1.
2.
3.
4.
www.honeywellvideo.com
Figure 7-17 Handle Settings
Click OK to save the settings.
Repeat step 3 to step 8 to configure settings for other channels.
Note The video tampering detection area is in full-screen mode by default and cannot
be configured.
 
Click Menu Settings
Figure 7-18 Camera Settings Menu
Select the Advanced tab to enter the Advanced Camera Settings menu.
Select the camera to be configured with video tampering detection.
Select the Tamper Detection check box to enable this feature (see
Camera to enter the Camera Settings menu (see Figure 7-18).
Figure 7-19).