Special System Trouble Display - Bosch Security System User Manual

Special System Trouble Display

These displays appear on all keypads in the system. See
Standard Displays for a description of each system
trouble display. Pressing COMMAND 4 or the Silence>
soft key will silence a system trouble tone, but the
System Trouble display will not clear until the faulted
condition is corrected.
Entry Delay Tone and Display
When you enter an armed system through a point
programmed for entry delay, the command center emits
a repeating warble tone and displays
AREA 1 WAREHOUSE is
in entry delay for 3 seconds
and then
Enter Passcode and press
ENTER key to disarm to
remind you to turn off
your security system
4998122475C
If you fail to turn off the security system before the
entry delay time expires, it will sound the burglary tone
and may also send an alarm report to your security
company.
Security System User's Guide
Part I: Security System Basics
Special System Trouble Display