Special System Trouble Display; Cleared Events; Entry Delay Tone And Display - Bosch Security Systems User Manual

If the system is armed, the display shows the number
of non-fire trouble (A1 ## TROUBLES
custom text for each activated point.
Silencing Non-Fire Trouble Events Silencing Non-Fire Trouble Events Silencing Non-Fire Trouble Events Silencing Non-Fire Trouble Events Silencing Non-Fire Trouble Events
Entering a personal passcode with the proper authority
level silences a trouble and disarms the panel if it is
armed. If you wish to clear the scrolling trouble
message from the display, enter COMMAND 4. If you
wish to review these cleared troubles, use COMMAND
40.
Viewing Non-Fire Trouble Events Viewing Non-Fire Trouble Events Viewing Non-Fire Trouble Events Viewing Non-Fire Trouble Events Viewing Non-Fire Trouble Events
After a passcode is entered, the text of the activated
points continues to scroll through the display. Press
NEXT NEXT to scroll displays manually. Events scroll from NEXT
NEXT NEXT
oldest to newest. Use COMMAND 4 to clear messages
from the display.
Special Sy Special Sy Special Sy Special Sys s s s s t t t t t em T Special Sy em T em T em Tr r r r r ouble Displa em T
SERVC AC FAIL and SERVC BATT LOW SERVC AC FAIL SERVC AC FAIL SERVC BATT LOW SERVC BATT LOW are examples SERVC BATT LOW
SERVC AC FAIL SERVC AC FAIL SERVC BATT LOW
of system trouble displays. These displays appear on
all keypads in the system. All system trouble displays
20
A1 ## TROUBLES A1 ## TROUBLES
A1 ## TROUBLES A1 ## TROUBLES ) and then
ouble Display y y y y ouble Displa ouble Displa ouble Displa
begin with SERVC SERVC. See Standard Displays for a SERVC SERVC
SERVC
description of each system trouble display. Entering
your passcode or a COMMAND 4 silences a system
trouble tone, but the SERVC display does not clear until
the faulted condition is corrected.
Cleared Events Are Not Lost Cleared Events Are Not Lost Cleared Events Are Not Lost Cleared Events Are Not Lost Cleared Events Are Not Lost
If you clear the alarms and troubles from the display,
you can still view all the events that occurred since
thelast time the system was armed by using COMMAND
40 (View Event Memory).

Entry Delay Tone and Display

Entry Delay Tone and Display Entry Delay Tone and Display Entry Delay Tone and Display Entry Delay Tone and Display
When you enter an armed system through a point
programmed for entry delay, the command center emits
a repeating tweedle tone and displays DISARM NOW
as a reminder to turn off the security system.
Failure to turn off the security system before the entry
delay time expires may sound the burglary tone and
could result in an alarm report being sent to the
security company.
DISARM NOW DISARM NOW DISARM NOW
DISARM NOW