Special Alerts (Command + 7 And Command + 9) - Bosch Security System User Manual

Special Alerts (COMMAND + 7 and COMMAND + 9)

Description
Commands 7 and 9 can be programmed to respond to a
choice of numerous situations that may need
immediate attention. They may also be used to send a
silent alarm to your security company without
sounding an alarm signal on the premises. Check with
your security company for the options they offer.
Using COMMAND 7:
1. Ensure your
command center
shows idle
disarmed text.
2. Press the
COMMAND key.
The display
shows *System
Command*.
4998122475C
Special Alerts (COMMAND + 7 and COMMAND + 9)
3. Press the 7 key.
Your COMMAND 7 special alert has been
programmed to:
o notify your security company
o ring a bell on your premises
o display at your command center
Description:
Security System User's Guide
Part II: System Commands