Part II: System Commands
Turning the System On (Arming) With a Duress Passcode
Turning the System On (Arming) With a Duress Passcode
Your passcode may have a special duress feature that is
simply your personal passcode with its last digit
increased by 1 or 2.
If an intruder demands that you arm or disarm the
security system, you can use your duress passcode. The
duress passcode arms or disarms the system and sends a
duress report to your security company. There is no
alarm tone or visual indication at the premises that the
report is sent. Check with your security company before
attempting to use this feature.
Security System User's Guide
4998122475C
Need help?
Do you have a question about the Security System and is the answer not in the manual?
Questions and answers