Bosch Security System User Manual page 47

PERIMETER INSTANT (COMMAND + 2)
Turn On the Perimeter With No Delays
Description
Use this function to turn on only the perimeter of your
building, leaving the interior of the building disarmed.
This function allows no exit or entry delay time through
the perimeter, including the designated exit delay door.
This function is useful in residential systems when
everyone is home and ready to retire for the evening.
You can have the security of an armed perimeter, yet
move freely throughout the interior of the premises.
It is also useful in commercial systems when you are
working before or after business hours and wish to have
the perimeter armed. Remember there are no entry or
exit delays when you use this function. You must
disarm (turn off) the system to enter or exit the
premises.
4998122475C
PERIMETER INSTANT (COMMAND + 2)
Using Perimeter Instant:
Interior points are not armed with this
1.
command and may remain faulted while
arming with COMMAND 2.
2. Press the COMMAND key.
The display shows
*System Command*.
3. Press the 2 key.
Note: If you prefer, you may use the Command
Menu in place of steps 2 and 3 to initiate
this function. Press the Menu> key to enter
the Command Menu, then press Next>
repeatedly until you reach the PERIMETR
INST ?> prompt. Press the key adjacent to
PERIMETR INST ?>.
Security System User's Guide
Part II: System Commands