Using The Command Center - Bosch Security System User Manual

Part I: Security System Basics

Using the Command Center

Your security system provides quick access to functions
by pressing the COMMAND key and one or two
additional keys.
Another way to access functions is through the Menu
List. This is done by pressing the key adjacent to Menu>
shown in the display.
Pressing the key adjacent to <Previous or Next> while
in the Menu List allows you to scroll up or down
through the list of functions programmed by your
security company.
4998122475C
Pressing the key adjacent to the function being
displayed initiates the function.
For example, if Reset Sensors?> is being displayed,
pressing the soft key adjacent to this will begin the
function.
To exit the Menu List,
press the <Exit key.
Use the Menu List to locate functions you don't use
often or that don't have a command number.
Security System User's Guide
Part I: Security System Basics
Using the Command Center