Bosch Security System User Manual page 54

Part II: System Commands
VIEW MEMORY ? (COMMAND + 4 + 0)
Note: If you prefer, you may use the Command
Menu in place of steps 2 and 3 to initiate
this function.
Press the Menu> key to enter the
Command Menu, then press Next>
repeatedly until you reach the VIEW
MEMORY ?> prompt
5. Your system displays event summary lines and
point text in this order:
fire alarm
summary
line, point
text for each
fire alarm
event;
alarm
summary
line, point
text for each
alarm event;
Security System User's Guide
fire trouble
summary
line, point
text for each
fire trouble
event;
trouble
summary
line, and
point text for
each trouble
event.
6. Press Next> to scroll
through the events.
7. If there are no
events to view,
There are
currently no
events in memory
displays.
8. Return to idle text at any time by pressing
<Exit.
4998122475C