Bosch Security System User Manual page 49

PERIMETER DELAY ? (COMMAND + 3)
Turn On the Perimeter With Delays
Description
In residential systems this function allows you to only arm
the perimeter and exit through a door programmed for
exit delay. The interior of the building remains disarmed.
People or pets are free to move throughout the interior of
the premises.
This function is also useful in commercial systems when
you are working before or after business hours and wish
to have the perimeter armed. Other system users can enter
through doors programmed for entry delay, which will
start the entry delay sounder and countdown.
4998122475C
PERIMETER DELAY ? (COMMAND + 3)
Using Perimeter Delay
1. Interior points are not armed with this command
and may remain faulted while arming with
COMMAND 3.
2. Press the COMMAND
key.
3. The display shows
*System Command*.
4. Press the 3 key.
Note: If you prefer, you may use the Command Menu in
place of steps 2 and 3 to initiate this function.
Press the key adjacent to Menu> to enter the
Command Menu, then press the key adjacent to
Next> repeatedly until you reach the PERIMETR
DELAY ?> prompt. Press the key adjacent to
PERIMETR DELAY ?>.
Part II: System Commands
Security System User's Guide