Passcode Protected Commands And Functions - Bosch Security System User Manual

Passcode Protected Commands and Functions

Commands and/or Functions within your system may
be programmed to require a valid passcode prior to
gaining access to that function. This ensures that only
authorized people have access to specific functions.
Follow the steps shown below when entering a
Command or Function that requires a passcode:
1. At the display Enter
Passcode and press the
ENTER key,
2. The passcode is shown as asterisks (*) when entered
and advance from the right side of the display to the
left until all passcode digits are entered.
4998122475C
Passcode Protected Commands and Functions
3. Enter the passcode and press the
ENTER key.
Security System User's Guide
Part II: System Commands