Bosch Security System User Manual page 21

Non-Fire Point Trouble and Supervisory Events
When a trouble event occurs, your command center
may be programmed to emit three warble tones, then a
pause (repeatedly).
If the system was armed, the command center display
shows the number of non-fire trouble events or non-
fire supervisory events and then custom text for each
activated point.
Silencing Non-Fire Trouble and Supervisory
Events
Pressing COMMAND 4 or Silence> silences and clears
Trouble and/or non-fire Supervisory conditions. In
addition to this, entering a personal passcode with the
proper authority level silences a trouble and disarms the
panel if it was armed. If you wish to review these cleared
troubles, using COMMAND 40 can do this.
4998122475C
Non-Fire Point Trouble and Supervisory Events
Viewing Non-Fire Trouble Events
After pressing COMMAND 4 or the Silence> soft key,
press any numeric key to view the faulted points. Press
Next> to scroll these displays manually if you wish.
Events scroll from oldest to newest.
Security System User's Guide
Part I: Security System Basics