Associating The Software And A User With A Faxfinder - Multitech FaxFinder FF440 Administrator's Manual

For Windows Vista, Windows 7 and later:
For the Windows account/user that is setup to use the printer:
1. Go to Start | Devices and Printers or open the Control Panel and select Printers (under Hardware).
2. Right-click on the printer you want to setup and select Properties (Vista) or Printer Properties (Windows
7).
3. Click Security.
4. Check both Print and Manage Printers in the Allow column.
5. Click OK.
Associating the Software and a User with a
FaxFinder
After installing the FaxFinder Client software, you must associate it with one or more FaxFinder units. This
association allows users to send faxes through a particular FaxFinder unit.
To associate the client software with one or more FaxFinder units, you need the following information for each
FaxFinder:
●
IP address
●
Username
●
Password
Check with your administrator to determine which FaxFinder units to use with your computer.
Note: If you use multiple FaxFinder units, all units may have the same username and password or there
may be a unique login for each.
1. Start the fax client, if it is not running.
If the software is set to launch when the computer boots up, the FaxFinder icon,
●
system tray in lower right corner.
If the FaxFinder icon is not in the system tray, click Start | All Programs | FaxFinder Client Software|
●
FaxFinder Client.
2. Click the FaxFinder Client icon,
FaxFinder x40 Administrator Guide
System Tray Icon
, and select Show FaxFinder Fax Client.
Chapter 8– Installing FaxFinder Fax Client Software
, appears in the
57