Before You Begin; Mounting Faxfinder (Optional); Wall Mounting - Multitech FaxFinder FF440 Administrator's Manual

Before You Begin

●
Disable Caller ID and Call Waiting on lines or PBX ports to be used with FaxFinder.
FaxFinder does not support the use of either Caller ID or Call Waiting. Caller ID delivers information
between rings before the call is answered. The Call Waiting beep causes fax communication errors.

Mounting FaxFinder (Optional)

FFx40 units are table-top units that can be wall- or rack-mounted. Mounting hardware is included.

Wall Mounting

Figure 3
shown in Figure 4.
2. Secure the bracket to the FaxFinder using two provided screws as shown in Figure 5.
3. Position a mounting bracket on the FaxFinder's left side using two mounting screw holes.
4. Secure the bracket to the FaxFinder using two provided screws.
FaxFinder x40 Administrator Guide
Figure 1
Figure 2
Figure 4
Chapter 2 – Hardware and Installation
Figure 5
1. P
osit
ion
a
mo
unti
ng
bra
cke
t
(Fig
ure
3)
on
Fax
Fin
der'
s
righ
t
side
usin
g
two
mo
unti
ng
scre
w
hol
es
as
15